[. . . ] .
x
Table of contents
Table of contents
1 Introduction
1. 1 1. 1. 1 1. 1. 2 1. 2 1. 3 1. 3. 1 1. 3. 2 1. 3. 3 1. 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Exemption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Composition of user manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] On how to edit/delete a registered address, contact your administrator of the copier. The Destination Manual Input screen appears.
4
Configure the necessary items on the Address Input screen. For more information on how to input characters, refer to "How to Input Characters" on page 3-7. [Address] Enter an E-Mail address within 250 characters in alphameric characters and signs.
bizhub PRO 920 Scanner
6-5
6
Configuring Destination for the Network Scanner Features [Register Name] Enter a Name that is displayed on the Select Destinations/Storage Locations screen (E-Mail) within 24 characters in alphameric characters and signs. If you do not input a Name, the first 24 characters of an E-Mail address are displayed on the Select Destinations/Storage Locations screen (E-Mail). [Character for Search] Used as a search keyword when you search destinations. Needs to be input within 24 characters in alphameric characters and signs.
5
Press the [Register] key. The E-Mail address is registered, and you are brought back to the Select Destinations/Storage Locations screen (E-Mail).
6
Make sure that the registered Name is displayed.
!
Detail
If the desired Name is not displayed on the page, press switch between pages.
/
to
An administrator is to edit/delete once registered destinations. For more information, contact your administrator.
6-6
bizhub PRO 920 Scanner
Configuring Destination for the Network Scanner Features
6
6. 3
Registering the HDD-B
If you want to store the scanned data on the HDD-B, you need to register boxes on the HDD-B. The registration is done in the following steps.
!
Detail
For more information of HDD-B to be used, refer to "About the HDD" on page 2-3. For E-Mail/FTP/HDD/SMB, destinations can be registered as many as 500 in sum.
How to register the HDD
1 2
Press the [Scan] on the control panel. In the initial settings, the Select Destinations/Storage Locations screen (E-Mail) is displayed. For information on the initial settings of the Scan screen, contact your administrator of the copier.
3
Press the [Address Input] key. In the initial settings, such index keys as [A-C] and [D-F] are displayed. On how to edit/delete a registered Box Number, contact your administrator of the copier. The Address Input screen appears.
4
Configure the necessary items on the Address Input screen. For more information on how to input characters, refer to "How to Input Characters" on page 3-7. If you want to use this copier as a scanner, it is recommended that an administrator assigns a Box Number to each user and informs the assignment by an E-Mail in advance. 6-7
bizhub PRO 920 Scanner
6
Configuring Destination for the Network Scanner Features [UserBoxNumber] Input a 9-digit (000000001-999999998) UserBoxNumber. The boxes in which scanned data are stored are managed by 9-digit UserBoxNumber. Multiple registrations can be made to a same UserBoxNumber with different names. In this case, the [Password] is common and the scanned data is stored in the same box. [. . . ] The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc. , code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft. com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. [. . . ]